I've created this discussion to both ask for help and to share my experience.
One of our products that we ship FBA has been measured incorrectly inside the Amazon Fulfilment centre and this has drastically increased the FBA Fee we pay on this item.
Upon asking Seller Support for help they kindly provided a photo of the product measurement that I have attached below.
It has clearly been inflated and the operator is measuring empty space inside the packaging to inflate the size.
I have challenged this and Seller Supports response is 'we measure the products along with the policy'.
Lesson Learnt - We will adjust our packaging on any new stock being sent into the Fulfilment Centre. But this does not help in the short term with the stock already sent in.
@Julia_Amazon@Julia_Amzn@Winston_Amazon@Maja_Amazon@Spencer_Amazon@Sarah_Amzn@Ezra_Amazon@Maya_Amazon@Simon_Amazon
Mods is there any support you can provide with this to have the product correctly measured? Or is this actually Amazon Policy to inflate packaging to get higher measurements as Seller Support have advised?
The Seller Support case ID is 10134824542.
This is how they measure. It is unethical and wrong.
I have to squash every bag down and use loads of sellotape on every item before I send it. I waste so much time.
Usually they use “line of sight” laser measuring equipment by throwing the item into it and whichever way it lands is how it is measured. The tape measure they used in the photo is just for the photo to justify their original incorrect measurement.
It is how it is and you won’t change it. They did send a brief email to this effect some time ago but I’ve been unable to find it.
I am having exactly the same problem. I have repackaged 8 of my products and sent them in. None of the products are over 1.5cm deep.
This morning the results are in. The measurements are WAY off, especially the critical one - the depth. They are now pretty much over 2.5cms deep, one is 4cms.
In my case, there is no way to inflate the bags the items are in, all in cellophane bags, lots of tape to prevent air getting in.
The best part is also the weight. Some products have been on "diets" and reduced their weight by 80%, from me sending them in to getting them weighed.
I didn't know you could ask for a photograph. That's what I going to do next.
I'm fuming.
This is a well known issue and I am not entirely sure why something is not added into the staff training to correct this at the first re-measurement.
Surely that would take less time then having numerous support staff answering cases and trying to resolve the issue with even more re-measurements.
This one is still not resolved and is ongoing with seller support.
Hello @Seller_NCkW5CALvYDWn,
I'm Sarah with Amazon.
Has there been any modification to the packaging process for the product?
I've created this discussion to both ask for help and to share my experience.
One of our products that we ship FBA has been measured incorrectly inside the Amazon Fulfilment centre and this has drastically increased the FBA Fee we pay on this item.
Upon asking Seller Support for help they kindly provided a photo of the product measurement that I have attached below.
It has clearly been inflated and the operator is measuring empty space inside the packaging to inflate the size.
I have challenged this and Seller Supports response is 'we measure the products along with the policy'.
Lesson Learnt - We will adjust our packaging on any new stock being sent into the Fulfilment Centre. But this does not help in the short term with the stock already sent in.
@Julia_Amazon@Julia_Amzn@Winston_Amazon@Maja_Amazon@Spencer_Amazon@Sarah_Amzn@Ezra_Amazon@Maya_Amazon@Simon_Amazon
Mods is there any support you can provide with this to have the product correctly measured? Or is this actually Amazon Policy to inflate packaging to get higher measurements as Seller Support have advised?
The Seller Support case ID is 10134824542.
I've created this discussion to both ask for help and to share my experience.
One of our products that we ship FBA has been measured incorrectly inside the Amazon Fulfilment centre and this has drastically increased the FBA Fee we pay on this item.
Upon asking Seller Support for help they kindly provided a photo of the product measurement that I have attached below.
It has clearly been inflated and the operator is measuring empty space inside the packaging to inflate the size.
I have challenged this and Seller Supports response is 'we measure the products along with the policy'.
Lesson Learnt - We will adjust our packaging on any new stock being sent into the Fulfilment Centre. But this does not help in the short term with the stock already sent in.
@Julia_Amazon@Julia_Amzn@Winston_Amazon@Maja_Amazon@Spencer_Amazon@Sarah_Amzn@Ezra_Amazon@Maya_Amazon@Simon_Amazon
Mods is there any support you can provide with this to have the product correctly measured? Or is this actually Amazon Policy to inflate packaging to get higher measurements as Seller Support have advised?
The Seller Support case ID is 10134824542.
This is how they measure. It is unethical and wrong.
I have to squash every bag down and use loads of sellotape on every item before I send it. I waste so much time.
Usually they use “line of sight” laser measuring equipment by throwing the item into it and whichever way it lands is how it is measured. The tape measure they used in the photo is just for the photo to justify their original incorrect measurement.
It is how it is and you won’t change it. They did send a brief email to this effect some time ago but I’ve been unable to find it.
I am having exactly the same problem. I have repackaged 8 of my products and sent them in. None of the products are over 1.5cm deep.
This morning the results are in. The measurements are WAY off, especially the critical one - the depth. They are now pretty much over 2.5cms deep, one is 4cms.
In my case, there is no way to inflate the bags the items are in, all in cellophane bags, lots of tape to prevent air getting in.
The best part is also the weight. Some products have been on "diets" and reduced their weight by 80%, from me sending them in to getting them weighed.
I didn't know you could ask for a photograph. That's what I going to do next.
I'm fuming.
This is a well known issue and I am not entirely sure why something is not added into the staff training to correct this at the first re-measurement.
Surely that would take less time then having numerous support staff answering cases and trying to resolve the issue with even more re-measurements.
This one is still not resolved and is ongoing with seller support.
Hello @Seller_NCkW5CALvYDWn,
I'm Sarah with Amazon.
Has there been any modification to the packaging process for the product?
This is how they measure. It is unethical and wrong.
I have to squash every bag down and use loads of sellotape on every item before I send it. I waste so much time.
Usually they use “line of sight” laser measuring equipment by throwing the item into it and whichever way it lands is how it is measured. The tape measure they used in the photo is just for the photo to justify their original incorrect measurement.
It is how it is and you won’t change it. They did send a brief email to this effect some time ago but I’ve been unable to find it.
This is how they measure. It is unethical and wrong.
I have to squash every bag down and use loads of sellotape on every item before I send it. I waste so much time.
Usually they use “line of sight” laser measuring equipment by throwing the item into it and whichever way it lands is how it is measured. The tape measure they used in the photo is just for the photo to justify their original incorrect measurement.
It is how it is and you won’t change it. They did send a brief email to this effect some time ago but I’ve been unable to find it.
I am having exactly the same problem. I have repackaged 8 of my products and sent them in. None of the products are over 1.5cm deep.
This morning the results are in. The measurements are WAY off, especially the critical one - the depth. They are now pretty much over 2.5cms deep, one is 4cms.
In my case, there is no way to inflate the bags the items are in, all in cellophane bags, lots of tape to prevent air getting in.
The best part is also the weight. Some products have been on "diets" and reduced their weight by 80%, from me sending them in to getting them weighed.
I didn't know you could ask for a photograph. That's what I going to do next.
I'm fuming.
I am having exactly the same problem. I have repackaged 8 of my products and sent them in. None of the products are over 1.5cm deep.
This morning the results are in. The measurements are WAY off, especially the critical one - the depth. They are now pretty much over 2.5cms deep, one is 4cms.
In my case, there is no way to inflate the bags the items are in, all in cellophane bags, lots of tape to prevent air getting in.
The best part is also the weight. Some products have been on "diets" and reduced their weight by 80%, from me sending them in to getting them weighed.
I didn't know you could ask for a photograph. That's what I going to do next.
I'm fuming.
This is a well known issue and I am not entirely sure why something is not added into the staff training to correct this at the first re-measurement.
Surely that would take less time then having numerous support staff answering cases and trying to resolve the issue with even more re-measurements.
This one is still not resolved and is ongoing with seller support.
This is a well known issue and I am not entirely sure why something is not added into the staff training to correct this at the first re-measurement.
Surely that would take less time then having numerous support staff answering cases and trying to resolve the issue with even more re-measurements.
This one is still not resolved and is ongoing with seller support.
Hello @Seller_NCkW5CALvYDWn,
I'm Sarah with Amazon.
Has there been any modification to the packaging process for the product?
Hello @Seller_NCkW5CALvYDWn,
I'm Sarah with Amazon.
Has there been any modification to the packaging process for the product?